(Click picture to see animation)

• Underwriters Laboratories tested and listed per UL-2215
• Designed for no internal or confined space entry when performing routine maintenance. (see note1 below)
• Kleerwater™ can handle larger influent flows, allowing for smaller separator tanks. With smaller separation tanks, less installation costs.
• Kleerwater™ separators utilizes Stokes Law for defining rates of rise of oil spheres in a liquid medium
• Unique patented oil separation process enhances oil from water separation efficiencies
• Separation efficiencies down to 5 ppm & lower. (see note 2 below)
• Electronic audible and visual alarms available for preset level alarm notifications
• Separator material of construction: carbon steel.
• Single or double wall steel configurations available
• Handle continuous or intermittent influent flow rates.

Kleerwater™ Gravity Oil Water Separators

Kleerwater™, oil water separators, maybe constructed in single or double wall tank designs. Double wall configurations have interstitial monitoring capabilities. Tanks are built to Underwriters Laboratories UL-58 / UL-1746 construction standards. Kleerwater™ oil water separators are listed and tested to Underwriters Laboratories, UL-2215 standards. Separators are designed to separate free-floating oils and greases with specific gravities between 0.7 and 0.94, from fresh water influents.

Kleerwater™ separator design criteria is based on Stokes Law which defines the rates of rise of oil spheres in a liquid medium. Special coalescer "balls" enhances the separator's efficiency to obtain unmatched performance, down to 5 ppm.

Kleerwater™ oil water separators can handle larger influent flows, therefore allowing for smaller separators tank utilization. With smaller separation tanks, less installation costs are incurred.

Kleerwater™ separators are available with electronic audible and visual alarms for preset notification of liquid levels in the separator.

Kleerwater™ oil water separators are not designed for use in applications where cleaning detergents are involved unless the detergents are supplied and furnished by Kleerwater™ LLC technologies.

Solvents or highly dissolved solids, such as untreated sanitary sewers, should not be introduced into Kleerwater™ separators. Kleerwater™ separators will not separate chemical emulsions, dissolved hydrocarbons or volatile organic hydrocarbons.

1 – Maximum 180 day maintenance inspection schedule must be implemented for this claim to be applicable. Follow published maintenance instructions as published by the Kleerwater™ oil water separator manufacturer.
2 – Efficiencies are dependent on influent flow rates, concentrations and specific gravity of oil. Any one of these factors can affect the separators efficiencies of oil and water separation.

Sensors and Control Panels
Oil Water Interface Sensors
Oil Water Interface Sensors lengths over 96”
Annular Space Liquid Sensors
Control Panels (1 to 2 Channels)
Control Panels (3 or More Channels)
Sensor Lengths Selection Guide

Engineering Specification: Kleerwater (rtf)
General Notes: Kleerwater (pdf)
Separator Sizing: Kleerwater (pdf)

Brochure Literature: Kleerwater